How To Install Android 4.4.2 KitKat (XXU1ANCE) On Samsung Galaxy S5 LTE

Are you in Italy and using the Galaxy S5 LTE? Are you eager to upgrade to Android 4.4.2 KitKat (XXU1ANCE)? Good news! The following guide will walk you through installing it manually on your Samsung Galaxy S5 LTE.
Before Getting Started
Before you get started, ensure that your Galaxy S5 LTE is the SM-G900F model.
As always, you want to backup your device and charge it to at least 80 percent. Finally, enable USB Debugging mode by navigating to Settings -> Developer Options.
Installing Android KitKat 4.4.2 Official Build (XXU1ANCE) On Samsung Galaxy S5 LTE
  • Download the firmware package and Odin v3.09, available here and here.
  • Put your Galaxy S5 in download mode by holding the Volume Down, Home and Power buttons. When a warning prompt appears, press Volume Up.
  •  Unzip Odin v3.09. Right click on Odin v3.09.exe and run the application as an administrator.
  • Using your USB cable, connect your Galaxy S5 to your computer. You should see one of the ID:COM fields turn blue in Odin. If this does not occur, reinstall your computer’s USB drivers.
  • Within Odin, press AP and select the .md5 file.
  • Make sure Re-Partition is deselected, then check Auto Reboot and F. Reset Time.
  • Press start, which will begin the installation process. Do nothing until this completes.
  • Your Galaxy S5 will reboot and you’ll officially be running Android 4.4.2 KitKat. Kudos. 
Good luck and good luck ...