How To Update Android 4.4.2 KitKat Mahdi ROM For Sprint LG G2 LS980

Google has recently launched its latest Android 4.4.2 firmware for many KitKat Nexus devices. The official KitKat mostly AOSP 4.4.2 release without much customization. If you want to enjoy a KitKat customized Android 4.4.2 on Sprint LG LS980 G2 Continue reading this guide to learn how to install Android 4.4.2 custom ROM based KitKat Mahdi Sprint LG LS980 G2 ....

This tutorial is only for Sprint LG G2 LS980. Don’t try this guide on any other Android device. Also, we are not responsible for any damage caused due to the instruction given in this page. Try this at your own risk. However, it is very unlikely that your device will be damaged if you follow all the instructions as it is which are mentioned in procedure.
Pre Requisites:

1. Backup your device data. You can follow our ultimate backup guide.
2. Make sure your device have at least 60% battery power. You can install an app like Battery Notifier BT Free on your Android device to check it easily.
3. You already have USB Driver Installed for Sprint LG G2 LS980 in your PC. [Download USB Drivers]
4. Make sure USB Debugging is enabled otherwise you won’t able to transfer file between PC and Sprint LG G2 LS980.
5. Your device have latest CWM version and up or TWRP 2.6.1 and up installed.

If you done everything that we mentioned above then you are ready to follow step-by-step guide on how to install Android 4.4.2 KitKat based MahdiROM on Sprint LG G2 LS980.

File Required(Download by clicking on it)

Mahdi Android 4.4.2 KitKat ROM For Sprint LG G2 LS980 [Filename:]
Google Apps [Filename:] or any other KitKat Gapps

How to Install Android 4.4.2 KitKat based Mahdi ROM on Sprint LG G2 LS980
  1. Connect your device to PC using USB cable and then copy downloaded files to the SD card of your device.Important: Don’t extract any files.
  2. Disconnect USB and then turn off your Sprint LG G2 LS980.
  3. Now, Boot into recovery mode. To do so, press and hold Volume down & Power, when the LG logo appears release and press them again, then press the Power button three times. In recovery use Volume Keys to navigate between option and Power or Home Key to select an option. 
  4. Perform a Nandroid backup of your existing ROM that you can restore later if this new ROM not work or you want to go back into your previous ROM. To perform a backup, select Backup and Restore, then on the next screen, select Backup again. Go back to main recovery menu after backup is complete.
  5. Now, perform data wiping task. To do so, select wipe data/factory reset, then select Yes on next screen to confirm your action. Wait few minutes till the data wipe is complete. Now come back to CWM recovery main menu. Select wipe cache partition and after wiping process done, select Wipe Dalvik Cache under advanceoption to perform Dalvik cache wiping.
  6. Select install zip from sdcard, then select choose zip from sdcard. Now, locate the Mahdi ROM Zip file that you copied earlier in Step 1 and select it by pressing Power button. Confirm installation by selecting Yes – Install on the next screen. The ROM installation will begin.
  7. Once the ROM installation process end, repeat the step 6 but choose the file instead of ROM zip to install the Google apps package.
  8. When installation is completed, go back to the main recovery menu and select reboot system now to reboot your Sprint LG G2 LS980 and boot up into rooted Android 4.4.2 KitKat ROM Mahdi. 
  9. Returning to Previous ROM: To go back to your previous ROM, boot into recovery, select backup and restore then restore your previous ROM by selecting it from the list.
Congrats! Android 4.4.2 KitKat firmware based custom ROM Mahdi is now installed and running on your Sprint LG G2 LS980. [Note: Root is turned off by default in CM derived ROMs, you must enable developer settings first (tap the build number 8 times under about device), then enable root under Developer Settings] [source]