Download and install the latest P605MUBUBMJ5 4.3 Jelly Bean Official Firmware on Samsung Galaxy Note 10.1 LTE SM-P605M (2014 Edition). Samsung has just launched the firmware. This new device released by Samsung with Android 4.3 you can JB and this latest update of Android 4.3 Jelly Bean UBUBMJ5 regular firmware. Follow the tutorial below to install the firmware manually via Odin. You can check for the latest firmware available for your device via OTA (over the air) from Settings-About Tablet-Software Update.
As the Galaxy Note 10.1 LTE P605M released with the Android 4.3 Jelly Bean, you can expect few bug fixes and performance enhancements with this latest update. It is always recommended to update your device to the latest firmware available to keep updated with the latest security changes....
If you do not know, Android 4.3 Jelly Bean is equipped with many new features and changes from previous versions of android-like Multi-page feature on the lockscreen, support widget on the lockscreen, Tabbed UI in the Settings, Daydream feature, voice control feature to applications such as tablets, cameras, music players and so on, Hands-free mode, New Notification Panel with 2 pages, ANT + support, TRIM support, camera Repair, Move app to SD feature, New for for Samsung keyboard, Changed the icon for multiple applications for for Samsung, TouchWiz Fine, featuring Adapt, Adapt voice, full-screen mode for for Samsung apps and more.
So, want to update your LTE Galaxy Note 10.1 P605M to UBUBMJ5 latest Android 4.3 Jelly Bean firmware? To install the official way, you can go to the OTA update as mentioned above or download and install the firmware via Samsung Kies utility for. However, if you prefer the manual way to update the official firmware, then follow this article to find step-by-step user guide for Android 4.3 update UBUBMJ5 latest firmware on your Galaxy Note 10.1 LTE P605M via Odin.
Important Note:
"The firmware is released only for the Samsung Galaxy Note 10.1 LTE SM-P605M model, so don’t try this in any other android device. Check your device model number from Settings-About Tablet. Also the tutorial is based on Windows PC. Follow all the pre-requisites, procedures and steps carefully to avoid breaking your Tablet".
Android 4.3 Jelly Bean P605MUBUBMJ5 Official Firmware Download List
Samsung rolled out the firmware for the following countries. The firmware which are unbranded or not locked to any carrier, no matter of which country or region, can be flashed on any Galaxy Note 10.1 LTE SM-P605M model.
- Chile: P605MUBUBMJ5_P605MUUBBMJ5_CHO.zip | Link2
- Colombia: P605MUBUBMJ5_P605MUUBBMJ5_COO.zip | Link2
[Firmware for rest of the countries and carrier will be added here when available]
Pre-Requisites:
Check battery percentage, your device should have at least 90% battery power
Turn on USB Debugging mode, go to Settings-Developer Options-USB Debugging
Backup important data and settings to external storage follow this guide
Install USB driver for your device on your computer- Download Samsung USB Driver
Points to be noted:
- If you are using any Custom ROM such as- CyanogenMod, Paranoid Android, AOKP, SLIM ROMs etc, then it’ll replaced by this official Stock ROM
- Custom Recovery (CWM or TWRP Recovery) will be replaced by Stock Recovery
- After flashing official firmware, your device will no longer belongs to rooted device. However you can root your device any time after flashing the firmware.
All the above pre-requisites are very important and must follow before proceed to installation guide. Hope you get all the above points. Now, go through the below tutorial to install Android 4.3 P605MUBU
BMJ5 official firmware on Galaxy Note 10.1 LTE P605M.
How to Install Android 4.3 Jelly Bean Official Firmware on Galaxy Note 10.1 LTE P605M through Odin:
- Download Android 4.3 UBUBMJ5 Firmware for Galaxy Note 10.1 LTE P605M from the above list
- Download Odin 3.07
- Switch off your Tablet and boot Galaxy Note 10.1 LTE P605M into Download Mode by pressing and holding the Volume Down and Power keys together until you get the warning message, now press Volume Up key to proceed to Download Mode.
- Extract the downloaded Odin3.07 zip file and run the Odin3 v3.07.exe file as an administrator (Right click on the .exe file and click on Run as administrator)
- Now connect your Galaxy Note 10.1 LTE P605M to your computer via USB cable
- In Odin3 screen, you should see a COM Port number like “0:[COM7]” at ID:COM section and “Added!” text at the message box. This means your device has been detected by Odin3.
- Make sure that, only the “Auto Reboot” and “F. Reset Time” options are checked.
- Now, extract the downloaded firmware zip file, you’ll find a firmware file with extension.tar.md5
- In Odin screen, click on PDA button (if you are using the latest Odin Version, then click on AP button instead of PDA) and select the firmware file with .tar.md5 extension (The firmware file look something like: P605MXXDLJ5_P605MODDDLI7_INU.tar.md5)
- Now, click on the Start button to begin the installation process, wait few moments.
- Once completed, you would see “PASS!” message in ID:COM port having green background
- Your Tablet should automatically reboot after completion
- You can now disconnect your Tablet from computer
- Finish
That's all for updating firmware official Android 4.3 Jelly Bean on the Galaxy Note 10.1 LTE BC-P605M. Hope you get all the above points and successfully completed the tutorial. If you follow everything as mentioned in the tutorial above, then you P605M LTE Galaxy Note 10.1 should now be running on Android 4.3 Jelly Bean version UBUBMJ5 latest build. You can verify the details of the firmware update from Settings-About Tablet. If you have any questions or problems with the download link, do not hesitate to contact with us and do not forget to share your thoughts in the comments below.