People who are waiting for all changes to the latest firmware for the Samsung Galaxy S4 SHV-E300L LTE (Korea Variant) Smartphone, can now download and install the official Android 4.3 Jelly Bean E300LKLUEML1 firmware. E300L LTE Galaxy S4 was released with Android 4.2.2 Jelly Bean and began to acquire Android 4.3 Jelly Bean since October. Incase you missed to update your device, then here we have the latest firmware for the device KLUEML1. Follow our simple tutorial below to install the firmware manually via Odin. You can check the latest firmware available for your device via OTA (over the air) from Settings-About Phone-Software Update.
If you E300L LTE Galaxy S4 already run on Android 4.3 Jelly Bean, then you can only expect a few bug fixes and performance improvements with the latest firmware update. So, want to update the Galaxy S4 to Newest KLUEML1 E300L LTE Android 4.3 Jelly Bean firmware? To install the official way, either you can go for the OTA update as mentioned above or download the firmware via utility for Samsung Kies. However, most of us prefer the manual way to update the official firmware. So, in this article you will enjoy the step by step user guide update of Android 4.3 KLUEML1 latest firmware on your Galaxy S4 E300L LTE via ODIN.
Important Note:
"The firmware is released only for the Samsung Galaxy S4 LTE SHV-E300L model, so don’t try this in any other android device. Check your device model number from Settings-About Phone. Also the tutorial is based on Windows PC. Follow all the pre-requisites, procedures and steps carefully to avoid breaking your phone".
Android 4.3 Jelly Bean E300LKLUEML1 Official Firmware Download List
Pre-Requisites:
- Check battery percentage, your device should have at least 60% battery power
- Turn on USB Debugging mode, go to Settings-Developer Options-USB Debugging
- Backup important data and settings to external storage- follow this guide
- Install USB driver for your device on your computer- Download Samsung USB Driver
Points to be noted:
- If you are using any Custom ROM such as- CyanogenMod, Paranoid Android, AOKP, SLIM ROMs etc, then it’ll replaced by this official Stock ROM
- Custom Recovery (CWM or TWRP Recovery) will be replaced by Stock Recovery
- After flashing official firmware, your device will no longer belongs to rooted device. However you can root your device any time after flashing the firmware.
All the above pre-requisites are very important and must follow before proceed to installation guide. Hope you get all the above points. Now, go through the below tutorial to install Android 4.3 E300LKLUEML1 official firmware on Galaxy S4 LTE E300L.
How to Install Android 4.3 Jelly Bean Official Firmware on Galaxy S4 LTE E300L through Odin:
- Download Android 4.3 KLUEML1 Firmware for Galaxy S4 LTE E300L from the above list
- Download Odin 3.07
- Switch off your phone and boot Galaxy S4 LTE E300L into Download Mode by pressing and holding the Volume Down+Home+Power buttons (long press until the boot screen appear), now press Volume Up key to proceed to Download Mode.
- Extract the downloaded Odin3.07 zip file and run the Odin3 v3.07.exe file as an administrator (Right click on the .exe file and click on Run as administrator)
- Now connect your Galaxy S4 LTE E300L to your computer via USB cable
- In Odin3 screen, you should see a COM Port number like “0:[COM7]” at ID:COM section and “Added!” text at the message box. This means your device has been detected by Odin3.
- Make sure that, only the “Auto Reboot” and “F. Reset Time” options are checked.
- Now, extract the downloaded firmware zip file, you’ll find a firmware file with extension.tar.md5
- In Odin screen, click on PDA button and select the firmware file with .tar.md5 extension(The firmware file look something like: E300LXXDLJ5_E300LODDDLI7_INU.tar.md5)
- Now, click on the Start button to begin the installation process, wait few moments.
- Once completed, you would see “PASS!” message in ID:COM port having green background
- Your phone should automatically reboot after completion
- You can now disconnect your phone from computer
- Finish
Congratulations! You E300L LTE Galaxy S4 is now updated to Android 4.3 Jelly Bean and the latest official firmware. Hope you managed to do the update process. If you follow everything as mentioned in the tutorial above, then you you LTE Galaxy S4 should now be running on the latest Android 4.3 Jelly Bean build KLUEML1 version. You can confirm the details of the firmware update from Settings-About Phone. If you find a problem with the above tutorial and download link, please do not hesitate to contact with us using the comment form below ..